DESCRIPTION
The G-Plate plate-type heat exchanger consists of a
number of embossed and sealed plates. Depending on the application, all cold-drawing materials, such as:
Stainless steel
Nickel alloys
Titanium
254 SMO
Hastelloy
and other materials are can be used, to name only a few. The plates are mounted between the upper and lower guide rail and clamped between the two frame platesy bolts.The seals are elastomers used as required by temperature, pressure and the chemical properties of the two media, e.g.:
NBR
EPDM
FKM (Viton), etc
and other sealing materials.
Mixing of the two media in case of defective seal is prevented by double seals at the transition openings and the leakage space in-between, which is open to the outside. Any leak will be detected from outside immediately before the two media have a chance of mixing through the seal.
MATERIALES DE CONSTRUCCIÓN
Todas las zonas en contacto con el producto (tubo interior y codos) son fabricadas en acero inoxidable AISI-316L. Aceros Dúplex también son disponibles si es necesario manejar fluidos corrosivos.
El lado de servicio está construido en acero inoxidable AISI-304, aunque también se puede emplear AISI- 316L si se desea.
Las restantes zonas del intercambiador sin contacto con los fluidos son de acero inoxidable AISI-304.
Las juntas tóricas y las juntas de las conexiones se fabrican normalmente en silicona, si bien se emplean otros elastómeros cuando los fluidos y/o la aplicación así lo demandan. Materiales alternativos tanto para el tubo exterior como interior son disponibles bajo consulta.
CONEXIONES
Para agilizar y flexibilizar la instalación e inspección de las unidades, los Intercambiadores XTube® Multitube incorporan conexiones “clamp” según los estándares ISO.
En caso de demanda se suministran las contra-conexiones, abrazaderas y juntas de goma para poder completar la conexión de intercambiador con las tuberías de entrada y salida de los fluidos al intercambiador.
DESIGN CONDITIONS
Operating temperatures from -20 °C to 155 °C
Operating pressure up to 25 bar, suitable for vacuum
Plate thicknesses from 0.4 to 0.9 mm
Compact design, can be expanded
Very high heat transfer coefficient
Low-wear and requiring little maintenance
Wide range of materials
Suitable for many different media
SPECIAL TYPES OF G-PLATE
G-Plate-Free-flow.
Plate heat exchangers whose large spacing between plates (without points of contact) allows processing fluids with particles.
The G-Plate-DW (“Double-wall