SWECO Vibro-Energy Finishing Mills perform the complete spectrum of finishing parts from rough to delicate. Included are deburring, flash removal, edge-breaking, metal clean-up, rough surface work, prepaint finishing, descaling, burnishing, chemical treating, special surface effects, and the development of reflectivity. They are also ideal for ball burnishing. 

The Long Radius Series contain mills with capacities ranging from 1 to 24 cubic feet. That's 300 to 7,200 pounds of load capacity. These mills can process parts as large as 36 inches long. They also have special features for low noise operation and minimum vibration transfer to the floor. The series has an improved internal parts/media separation system that installs quickly for faster unloading.
FMD-1LR

Capacity 1 ft³ (300 lbs. load capacity)
Max Straight Part Length 9 inches
Motion Generator 1/3 hp, TENV, 1200 RPM, single phase 115 volt; 3-phase 230, 460 or 575 volt. 60 Hz. (non-reversing)
Vibralite Bowl Chamber - all cast polyurethane elastomer with ¾" minimum thickness in high wear areas
Shipping Weight 195 lbs. (empty)
FMD-3LR

Capacity 3 ft³ (900 lbs. load capacity)
Max Straight Part Length 15 inches
Motion Generator 1 ¼ or 2 ½ hp, TENV, 1200 RPM, 3-phase 230, 460, or 575 volt. 60 Hz. (non-reversing)
Lining Abrasion-resistant lining of cast polyurethane with ¾" minimum thickness in high wear areas.
Shipping Weight 850 lbs. (empty)
FMD-4LR

Capacity 4 ft³ (1200 lbs. load capacity)
Max Straight Part Length 18 inches
Motion Generator 2 ½ hp, TENV, 1200 RPM, 3-phase 230, 460, or 575 volt. 60 Hz. (non-reversing)
Lining Abrasion-resistant lining of cast polyurethane with ¾" minimum thickness in high wear areas.
Shipping Weight 960 lbs. (empty)
FMD-7LR-2

Capacity 7 ft³ (2100 lbs. load capacity)
Max Straight Part Length 20 inches
Motion Generator 5 hp, TENV, 1200 RPM, 3-phase 230, 460, or 575 volt. 60 Hz. (non-reversing)
Lining Abrasion-resistant lining of cast polyurethane with ¾" minimum thickness in high wear areas.
Shipping Weight Approximately 1620 lbs. (including control panel)
FMD-10LR

Capacity 10 ft³ (2500 lbs. load capacity)
Max Straight Part Length 24 inches or more, depending on part cross-section and batch size
Motion Generator 5 hp, TENV, 1200 RPM, 3-phase 230 or 460 volt. 60 Hz.
Lining Abrasion-resistant ¾" Cast Polyurethane
Shipping Weight Approximately 1025 lbs.
FMD-14LR

Capacity 14 ft³ (4200 lbs. load capacity)
Max Straight Part Length 24 inches
Motion Generator 5 hp, TENV, 1200 RPM, 3-phase 230, 460, or 575 volt. 60 Hz. (reversing)
Lining Abrasion-resistant lining of cast polyurethane with ¾" minimum thickness in high wear areas.
Shipping Weight Approximately 2250 lbs. (including control panel)
FMD-24LR

Capacity 24 ft³ (7200 lbs. load capacity)
Max Straight Part Length 36 inches
Motion Generator 10 hp, TENV, 1200 RPM, 3-phase 230, 460, or 575 volt. 60 Hz. (reversing)
Lining Abrasion-resistant lining of cast polyurethane with ¾" minimum thickness in high wear areas.
Shipping Weight Approximately 3800 lbs. (including control panel)

• 
  tldr (2).pdf
  1359 KB
• 
  tldr (1).pdf
  755 KB
• 
  tldr.pdf
  505 KB