产品
ALFRED GRUBER GMBH
奥地利
    Microbrewery KB 125

    8745

    86

    129

    联系供应商
    收藏 点赞

    描述

    目录

    视频

    MICRO BREWERY – two kettle brew house

    Type: KB 125, to produce 125 liters of wort consists of:

    Mobile base frame, made of stainless steel

    with two steering and two fixed rolls ø100
    cover plate with notch to hook in the brew kettle and space for the lauter tun,
    drain DN 40 with tub under the brewery

    Dimensions:

    Width: approx. 1800 mm
    Depth: approx. 800 mm
    Working height: approx. 900 mm
    Clearance height: approx. 120 mm

    Construction:
    brew kettle left
    Control cabinet
    Lauter tun right

    Stainless steel brew kettle, capacity 155 liters

    Hooked in the base frame
    Isolated (around the brew kettle)
    Electric heating elements
    DN 40 butterfly valve at the bottom
    Fixed piping DN32 between brew kettle and mash pump
    Made of stainless steel
    PT100 temperature sensor
    Flat cover with handle
    Agitator for brew kettle

    Stainless steel lauter tun, capacity 155 liters

    With four feet’s, to put it onto the base frame
    Flat lid with handhold
    Laser cut, slotted “false bottom” with centrically handle
    Butterfly valve DN32
    Blade to scarify grain filter bed and 2 liter mug for separation of first wort
    The false bottom can be removed and then the lauter tun can be used as a fermenting vessel
    With a special knife to cutting slits in the spent grains (for loosen)
    Without isolation and cooling jacket of lauter tun vessel but this is optionally

    Stainless steel mash / wort pump

    Hanging at the brewery base frame with open impeller and special slip ring shaft sealing
    at the deepest point with drain valve, for emptying the whole brewery

    Single wort cooler

    designed as soldered plate heat exchanger
    made of stainless steel with connections and mash strainer DN 20 at the inlet to cool down the wort from approx. 95°C / 203°F to 20°C / 68°F
    hidden mounted on the front of the base frame
    with strainer for hops from the boiling

    Control cabinet made of stainless steel

    Mounted on the rear edge side of the base frame
    With digital temperature controller from the brew kettle
    The temperature which will be heated can be set, but without rest time
    mode switch for heating of brew kettle (hand – O – automatic)
    selector switch for heating stages
    switch for mash / wort pump (Switches are removed with mash automatic touch panel)
    optionally with frequency converter for the mash pump
    其他
    Log in
    New to GM industry Sign up
    By signing up,you agree to our terms of use, privacy policy,and cookie policy
    have an account? Log in