Icing Cooker & Mixer

A World-Class Blender That Delivers High-Speed Blending with Scraped Surface Heat Transfer in One Vessel

Eliminate transfer pumps between cooking and mixing vessels.

Delays or idle periods may cause the syrup solutions to set up in the pump and lines resulting in unnecessary down time.

Flushing pumps and lines with water to prevent setup can inadvertently add water to the icing, resuling in the premature breakdown of the product during its shelf life. 

Unique Built-in Scraping Unit Allows Rapid Heat Transfer 
Without Burn-on

The Likwifier Plus icing Cooker & Mixer is a self contained unit designed to cook and mix icings and glazes in one third the time of conventional methods.

Designed for the safety of the operator, it elimintes the handling or transfer of scalding syrup from the cooker to the mixing machine.

Cooking vessel is insultated for efficient cooking and to prevent heat transfer from the cooking chamber to the exterior surface.

Features

Special Material: Standard 0.25" 316L product surfaces
Heat Transfer Surface: Type 316 stainless steel Temp-plate® heat transfer surface designed for 125 psi ASME at 450 deg. F. On shell and bottom cone.
Insulation: 2" Insulwool insulation on shell and bottom cone.
Outlet: 3" clamp type ferrule.
Casters: Four textite casters, two swivel and two rigid with brakes mounted on special base plates. Available for 50-100 gallon units.
Top Head: SBC split lids - 50 to 200 gallon size. Dome head with manway - 200 gallon size.
Available Sizes: 50, 100, 200 gallons.
Options

Hi-Lo variable rpm for impeller 600-2200 rpm with electrical controls mounted in a NEMA 4X stainless enclosure. 25 through 100 gallon units only.
A/C variable frequency drive system with (low voltage) operator's panel. A/C inverter mounted in a NEMA 12 (or NEMA 4X) enclosure and operator's panel in NEMA 4X.
Steam generator available. This is strongly urged for optimum and efficient processing time.